BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Neil Squire Society - ECPv6.17.3.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.neilsquire.ca
X-WR-CALDESC:Events for Neil Squire Society
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Halifax
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20180311T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20181104T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20190310T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20191103T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20200308T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20201101T050000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Vancouver
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20180311T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20181104T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20190310T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20191103T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20200308T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20201101T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20210314T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20211107T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20220313T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20221106T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20230312T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20231105T090000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Toronto
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20190310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20191103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20200308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20201101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20210314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20211107T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20220313T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20221106T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Winnipeg
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20190310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20191103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20200308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20201101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20210314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20211107T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20220313T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20221106T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Moncton
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20190310T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20191103T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20200308T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20201101T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20210314T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20211107T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20220313T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20221106T050000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Edmonton
BEGIN:DAYLIGHT
TZOFFSETFROM:-0700
TZOFFSETTO:-0600
TZNAME:MDT
DTSTART:20200308T090000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0700
TZNAME:MST
DTSTART:20201101T080000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0700
TZOFFSETTO:-0600
TZNAME:MDT
DTSTART:20210314T090000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0700
TZNAME:MST
DTSTART:20211107T080000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0700
TZOFFSETTO:-0600
TZNAME:MDT
DTSTART:20220313T090000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0700
TZNAME:MST
DTSTART:20221106T080000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0700
TZOFFSETTO:-0600
TZNAME:MDT
DTSTART:20230312T090000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0700
TZNAME:MST
DTSTART:20231105T080000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20200308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20201101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20210314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20211107T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20220313T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20221106T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Halifax:20191203T090000
DTEND;TZID=America/Halifax:20191203T160000
DTSTAMP:20191104T190745Z
CREATED:20191104T190745Z
LAST-MODIFIED:20191104T190745Z
UID:19726-1575363600-1575388800@www.neilsquire.ca
SUMMARY:UN Day for Persons with Disabilities LipSync Buildathon
DESCRIPTION:Please join us on December 3rd in Fredericton\, New Brunswick for International Day of Persons with Disabilities \nRegister to take part in the LipSync Build\, or register to attend the Guest Speakers segment from 10 – 11 am. \nThe LipSync enables a person that has no use of their hands to use a touchscreen device\, laptop or computer — it is a mouth operated joystick that allows a person to control an onscreen cursor with minimal head and neck movement. A “LipSync Buildathon” is an event that trains makers to build a LipSync. Makers will be supplied with the tools\, components\, parts and instructions\, and will work together to assemble a LipSync. \nRegister Today! \nhttps://www.eventbrite.com/e/un-day-for-persons-with-disabilities-lipsync-buildathon-tickets-69945487837 \n___________________________ \nVenez vous joindre à nous le 3 décembre à Fredericton\, N.-B. pour la Journée internationale des personnes ayant un handicap \nInscrivez-vous pour participer au Marathon d’innovation LipSync\, ou pour voir les Conférenciers Invités de 10:00 – 11:00 hres. \nLe LipSync permet à une personne qui ne peut utiliser ses mains de faire appel à un appareil à écran tactile\, ou encore un ordinateur portatif ou de bureau – il s’agit d’un manche à balai actionné par la bouche qui vous permet de commander un curseur à l’écran avec des mouvements minimes de la tête et du cou. Un marathon d’innovation LipSync est un événement qui forme les innovateurs à prototyper à partir d’une technologie d’assistance libre LipSync \nLes innovateurs recevront les outils\, les composantes\, les pièces et les instructions. Ils travailleront ensemble pour assembler des LipSyncs. \nInscrivez-vous aujourd’hui! \nhttps://www.eventbrite.com/e/un-day-for-persons-with-disabilities-lipsync-buildathon-tickets-69945487837
URL:https://www.neilsquire.ca/event/un-day-for-persons-with-disabilities-lipsync-buildathon/
LOCATION:Delta Hotels by Marriott Fredericton\, 225 Woodstock Rd\, Fredericton\, NB\, E3B 2H8\, Canada
CATEGORIES:Awareness Day,Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2019/11/UN-Day-for-Persons-with-Disabilities-LipSync-Buildathon.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20191205
DTEND;VALUE=DATE:20191206
DTSTAMP:20191114T190414Z
CREATED:20191114T190414Z
LAST-MODIFIED:20191114T190414Z
UID:19798-1575504000-1575590399@www.neilsquire.ca
SUMMARY:Hacking for the Holidays: Making Toys Accessible for Kids with Disabilities
DESCRIPTION:Makers Making Change is partnering with SAP’s Vancouver office to host a switch build and toy hacking event for children at the Sunny Hill hospital. SAP staff will work together to assemble some of our access switches and re-configure store bought children’s toys so that they can be connected with the switches. The objective is to give children with disabilities a chance to play with toys and learn about cause-and-effect. \nFor more information about this event or to learn more about how to organize a similar event for your organization\, please contact info@makersmakingchange.com
URL:https://www.neilsquire.ca/event/hacking-for-the-holidays-making-toys-accessible-for-kids-with-disabilities/
LOCATION:SAP\, 910 Mainland Street\, Vancouver\, BC\, V6B 1A9\, Canada
CATEGORIES:Buildathon,Hackathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2018/09/Adaptations.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20191206T080000
DTEND;TZID=America/Vancouver:20191206T170000
DTSTAMP:20190924T202518Z
CREATED:20190924T202505Z
LAST-MODIFIED:20190924T202518Z
UID:19341-1575619200-1575651600@www.neilsquire.ca
SUMMARY:Regina Toy Hack and Switch Build
DESCRIPTION:Makers Making Change will be running a toy hack hosted by SaskPower. In addition to hacking toys\, attendees will be making access switches from the Makers Making Change library. This event is expected to run on Dec 6th from 12pm-4pm.
URL:https://www.neilsquire.ca/event/regina-toy-hack-and-switch-build/
LOCATION:SaskPower\, 2025 Victoria Avenue\, Regina\, SK\, S4P 0S1\, Canada
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2019/09/Adaptations.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20200131
DTEND;VALUE=DATE:20200201
DTSTAMP:20200408T221752Z
CREATED:20200131T173738Z
LAST-MODIFIED:20200408T221752Z
UID:20301-1580428800-1580515199@www.neilsquire.ca
SUMMARY:George Street Middle School Switch Build
DESCRIPTION:Makers Making Change’s Atlantic office is partnering with George Street Middle School to host a switch build event\, featuring hacked toys for children with disabilities. Students will build Round Flexure Switches (MMC60). The event will take place at the middle school and is open to students.
URL:https://www.neilsquire.ca/event/george-street-middle-school-switch-build/
LOCATION:george street middle school\, 575 George St\, Fredericton\, NB\, E3B 1K2\, Canada
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2020/01/Round-Flexure-Switches-MMC60.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20200212T080000
DTEND;TZID=America/Vancouver:20200212T170000
DTSTAMP:20200130T175051Z
CREATED:20200130T175051Z
LAST-MODIFIED:20200130T175051Z
UID:20283-1581494400-1581526800@www.neilsquire.ca
SUMMARY:EA Global Talent Acquisition Build Event
DESCRIPTION:Makers Making Change’s head office is partnering with EA once again to host an internal switch build! Members of the EA Global Talent Acquisition team will be soldering and assembling Round Flexure Switches (MMC60) (opens in a new window).
URL:https://www.neilsquire.ca/event/ea-global-talent-acquisition-build-event/
LOCATION:Electronic Arts Vancouver\, 4330 Sanderson Way\, Burnaby\, BC\, V5G 4X1\, Canada
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2020/01/Round-Flexure-Switches-MMC60.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20200221
DTEND;VALUE=DATE:20200222
DTSTAMP:20200205T161130Z
CREATED:20200205T161130Z
LAST-MODIFIED:20200205T161130Z
UID:20376-1582243200-1582329599@www.neilsquire.ca
SUMMARY:Access Switch Build at Jefferson Middle School
DESCRIPTION:On Feb 21 2020\,Students at Jefferson Middle School will learn to build an access switch with the help the Albuquerque chapter of Makers Making Change.  The Albuquerque chapter is a partnership between  505Access and Bosque School students. At the event\, students learn uses for assistive technology and will learn how to use their makers skills to help people with disabilities. \nThis event is a closed event for students of Jefferson Middle School.
URL:https://www.neilsquire.ca/event/access-switch-build-at-jefferson-middle-school/
LOCATION:Jefferson Middle School\, 712 Girard NE\, Albuquerque\, NM\, 87106\, United States
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2020/02/Light-Touch-Switch.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20200227
DTEND;VALUE=DATE:20200228
DTSTAMP:20200131T172755Z
CREATED:20200131T172549Z
LAST-MODIFIED:20200131T172755Z
UID:20293-1582761600-1582847999@www.neilsquire.ca
SUMMARY:Montana State University Switch Build
DESCRIPTION:Makers Making Change’s Bozeman chapter is hosting an access switch build in partnership with Montana State University and MonTECH at the Jake Jabbs School of Entrepreneurship on Feb 27 2020. Participants will be making MMC Light Touch and Raindrop Switches. All switches will be QC’d and sent to MonTECH clients with disabilities.
URL:https://www.neilsquire.ca/event/montana-state-college-switch-build/
LOCATION:University of Montana\, South 8th Avenue - Room 111\, Bozeman\, MT\, 59717\, United States
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2019/05/Light-touch-switch.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20200320T140000
DTEND;TZID=America/Toronto:20200320T180000
DTSTAMP:20200220T232445Z
CREATED:20200220T232445Z
LAST-MODIFIED:20200220T232445Z
UID:20672-1584712800-1584727200@www.neilsquire.ca
SUMMARY:McGill LipSync Buildathon
DESCRIPTION:On March 20th\, McGill students of Professor Stefanie Blain-Moraes will participate in a Lipsync Buildathon! Students will learn to solder and assemble the sip and puff device\, which will then be sent to rehab centres and people with disabilities in Montreal who need it.
URL:https://www.neilsquire.ca/event/mcgill-lipsync-buildathon/
LOCATION:McGill University Hosmerhouse\, 3630 Promenade Sir William Osler W.\, Montreal\, QC\, H3G 1Y5\, Canada
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2020/02/McGill_0320_Poster-scaled-e1581548969127-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20200730T100000
DTEND;TZID=America/Vancouver:20200730T120000
DTSTAMP:20200722T194859Z
CREATED:20200722T191818Z
LAST-MODIFIED:20200722T194859Z
UID:22215-1596103200-1596110400@www.neilsquire.ca
SUMMARY:Virtual Build Event: Switch Build
DESCRIPTION:Makers Making Change are hosting a workshop in partnership with RBC Royal Bank on July 30th. \n(this is a private event and by invitation only for employees from BC and MSNWO Regions) \nFull build kits\, tools and step by step instructions will be supplied to participants. More information will be provided by your local RBC Royal Bank regional event coordinator. \nTo build the switch requires good motor skills and vision. \nYou will need to: \n\nbe comfortable with simple soldering\nhold and tighten a bolt\nhold and use a screwdriver\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/virtual-build-event-switch-build/
LOCATION:Alberta
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2020/07/IMG_9354-e1558549160236-2048x1536-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20200805T090000
DTEND;TZID=America/Vancouver:20200805T100000
DTSTAMP:20200722T212746Z
CREATED:20200722T212625Z
LAST-MODIFIED:20200722T212746Z
UID:22218-1596618000-1596621600@www.neilsquire.ca
SUMMARY:The Sip and Puff Adapted Mask Build-a-thon!
DESCRIPTION:Build a mask to help a person with a disability access their sip and puff devices while staying COVID safe! \n \nAbout this Event\n\nMakers Making Change‘s Atlanta Georgia Chapter and the Shepard Center are co-hosting a Sip and Puff Adapted Mask Build-a-thon! This event will occur simultaneously virtually and in person; Virtually (for the general public) and in-person event for the staff of the Shepherd Center.   Chapter Leader Kristen Webber will lead you through the process of building Aug 5 at 1pm EST\n\n \n\n\n\nWhere Will the Masks Made at the Event Go?\nMasks produced during this event will be supplied to inpatients and outpatients of the Shepherd Center. The Shepherd Center will also coordinate the COVID safe distribution of Sip and Puff masks created in the Atlanta\, Georgia area. For those producing masks in other areas in the United States and Canada hosts will review how to supply masks to sip and puff users in your area. \nHow Does the Virtual Event Work?\nFollowing registration\, participants are emailed the Zoom invitation for virtual participation 2 days before and the day of the event. Also included in the email there will be instructions for production\, and information regarding supplying masks to sip and puff users following production. A list of tools and materials is provided in the eventbrite registration link for your to purchase before the event. \nAbout Our Atlanta Georgia Chapter Leader:\nKristen works at the Shepherd Center as a dual spinal cord and brain injury specialist in Atlanta Georgia. She is currently an inpatient therapy manager within Shepherd’s spinal cord injury program. Kristen also works PRN in direct clinical practice at Emory Rehabilitation Hospital. Kristen received her BS and MS in Occupational Science and Technology; along with a graduate certificate in Assistive Technology and Accessible Design from the University of Wisconsin-Milwaukee. In 2017\, she was awarded Board Certification in Physical Rehabilitation from the American Occupational Therapy Association. In 2018 she became licensed as an Assistive Technology Professional. Kristen has a passion for universal design in products as well as digital and physical environments. During her tenure as Membership Chair she assisted her committee in founding the GOTA YouTube Channel. As Communication Chair she helped to bring universal design principles to the GOTA web page\, YouTube Channel\, Newsletter\, and email blasts improving accessibility for those with visual\, auditory\, and physical impairments. \n\n\n\n\n\nMakers Making Change is a project that pairs makers with people with disabilities who need access to low cost assistive technologies. The website hosts a library of assistive devices complete with instructions\, materials lists and design files. \nHow Do I Get Involved Outside this Event?\nSign up to volunteer your skills to make a project for a person with a disability (or request a device you need) at www.makersmakingchange.com
URL:https://www.neilsquire.ca/event/the-sip-and-puff-adapted-mask-build-a-thon/
LOCATION:Alberta
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2020/07/ShepherdCenter_Vert_300-467x500-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Winnipeg:20201105T120000
DTEND;TZID=America/Winnipeg:20201105T140000
DTSTAMP:20201123T214735Z
CREATED:20201123T214735Z
LAST-MODIFIED:20201123T214735Z
UID:22953-1604577600-1604584800@www.neilsquire.ca
SUMMARY:RBC MMC60 Switch Build
DESCRIPTION:Makers Making Change are hosting a workshop in partnership with RBC Royal Bank @ 4.00-6.00pm (CST) (this is a private event and by invitation only for employees in MSNWO Regions) Full build kits\, tools and step by step instructions will be supplied to participants. More information will be provided by your local RBC Royal Bank regional event coordinator. To build the switch requires good motor skills and vision. You will need to: \n\nbe comfortable with simple soldering (no experience necessary)\nhold and tighten a bolt\nhold and use a screwdriver\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/rbc-mmc60-switch-build/
LOCATION:Alberta
CATEGORIES:Buildathon
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20201119T160000
DTEND;TZID=America/Vancouver:20201119T200000
DTSTAMP:20201123T215350Z
CREATED:20201123T215350Z
LAST-MODIFIED:20201123T215350Z
UID:22956-1605801600-1605816000@www.neilsquire.ca
SUMMARY:Makers Making Change Internal LipSync Buildathon
DESCRIPTION:Our Makers Making Change Program and Chapter leaders are building a LipSync live. Follow along with the fun! Watch the live stream here. (new window)
URL:https://www.neilsquire.ca/event/makers-making-change-internal-lipsync-buildathon/
LOCATION:Alberta
CATEGORIES:Buildathon
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Winnipeg:20201125T120000
DTEND;TZID=America/Winnipeg:20201125T140000
DTSTAMP:20201123T214059Z
CREATED:20201123T214059Z
LAST-MODIFIED:20201123T214059Z
UID:22951-1606305600-1606312800@www.neilsquire.ca
SUMMARY:RBC Light Touch Switch Build
DESCRIPTION:Makers Making Change is hosting a workshop in partnership with RBC Royal Bank on November 25th 2020  @ 12noon-2.00pm (CST) (this is a private event and by invitation only for employees in MSNWO Regions) Full build kits\, tools and step by step instructions will be supplied to participants. More information will be provided by your local RBC Royal Bank regional event coordinator. To build the switch requires good motor skills and vision. You will need to: \n\nbe comfortable with simple soldering (no experience necessary)\ncomfortable using a glue gun (no experience necessary)\nhold and tighten a bolt\nhold and use a screwdriver\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/rbc-light-touch-switch-build/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2019/05/Light-touch-switch.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Moncton:20201203T140000
DTEND;TZID=America/Moncton:20201203T153000
DTSTAMP:20201120T234921Z
CREATED:20201120T234735Z
LAST-MODIFIED:20201120T234921Z
UID:22936-1607004000-1607009400@www.neilsquire.ca
SUMMARY:International Day For Persons With Disabilities Virtual Switch Build
DESCRIPTION:Neil Squire and Makers Making Change are excited to partner with New Brunswick’s Premier’s Council on Disabilities for a virtual event where participants will build adaptive switches in celebration of International Day for Persons with Disabilities! The International Day of Persons with Disabilities (IDPD) is annually observed on 3 December to promote the full and equal participation of persons with disabilities and to take action for the inclusion of persons with disabilities in all aspects of society and development. \nParticipants will be provided with tools and materials\, and be instructed by MMC staff on how to build a Round Flexure Switch (additional information on this switch can be found in our projects library) virtually. Participants learn how to solder and assemble the assistive device which will then be donated to Stan Cassidy Centre for Rehabilitation and their Technology Access program. Makers Making Change would like to thank Open Sky Cooperative in Sackville New Brunswick for participating in this event. \nRegistration for participating in this build event is currently closed\, but if you or your organization is interested in participating in a build\, please get in touch at info@makersmakingchange.com (new window)!
URL:https://www.neilsquire.ca/event/international-day-for-persons-with-disabilities-virtual-switch-build/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2020/11/Poster-Title-only-EN-2-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20210315T080000
DTEND;TZID=America/Vancouver:20210319T170000
DTSTAMP:20210313T001004Z
CREATED:20210313T001004Z
LAST-MODIFIED:20210313T001004Z
UID:23617-1615795200-1616173200@www.neilsquire.ca
SUMMARY:Bliss Carman Middle School Switch Builds
DESCRIPTION:Makers Making Change is excited to be in the classroom! Bliss Carman Middle School’s Grade 6 science classes will be making Light Touch and Raindrop switches during their class as part of learning about technology. Students are being provided with tools\, materials and instruction from MMC staff and throughout the week will build over 100 switches! Many thanks to our partners at the New Brunswick Premiere’s Council on Disabilities and National AccessAbillty Week which allow us to hold amazing events like this. \nBig thank you as well to Bliss Carman Middle School in Fredericton New Brunswick and teacher Mr. Chris Jones for taking on this project and partnering with us. Switches made during this week will be provided to Stan Cassidy Centre for Rehabilitation\, and throughout New Brunswick and Atlantic Canada.
URL:https://www.neilsquire.ca/event/bliss-carman-middle-school-switch-builds/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/03/Bliss-Carman-Switch-Build-1-1536x532-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Winnipeg:20210326T150000
DTEND;TZID=America/Winnipeg:20210326T170000
DTSTAMP:20210313T001415Z
CREATED:20210313T001415Z
LAST-MODIFIED:20210313T001415Z
UID:23619-1616770800-1616778000@www.neilsquire.ca
SUMMARY:Neovation Switch Build
DESCRIPTION:Makers Making Change are hosting a workshop in partnership with Neovation @ 3.00-5.00pm CST. (this is a private event and by invitation only for employees of Neovation.) Full build kits\, tools and step by step instructions will be supplied to participants. More information will be provided by your Neovation event coordinator. To build the switch requires good motor skills and vision. You will need to: \n\nbe comfortable with simple soldering (no experience necessary)\nhold and tighten a bolt\nhold and use a screwdriver\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/neovation-switch-build/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/03/Neovation-Switch-Build-Banner-1536x532-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Edmonton:20210428T130000
DTEND;TZID=America/Edmonton:20210428T140000
DTSTAMP:20210421T184219Z
CREATED:20210421T184219Z
LAST-MODIFIED:20210421T184219Z
UID:23713-1619614800-1619618400@www.neilsquire.ca
SUMMARY:PlayFull Potential Round Flexure Switch Build
DESCRIPTION:Makers Making Change is hosting a workshop in partnership with PlayFull Potential Calgary on April 28\, 2021  @ 1.00-2.00pm (MST) (this is a private event and by invitation only for PlayFull Potential employees) Full build kits\, tools and step by step instructions will be supplied to participants. To build the switch requires good motor skills and vision. You will need to: \n\nbe comfortable with simple soldering (no experience necessary)\nhold and tighten a bolt\nhold and use a screwdriver\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/playfull-potential-round-flexure-switch-build/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/04/PlayFull-Potential-Build-Banner-e1618936904980.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210518T190000
DTEND;TZID=America/New_York:20210518T200000
DTSTAMP:20210421T184627Z
CREATED:20210421T184627Z
LAST-MODIFIED:20210421T184627Z
UID:23715-1621364400-1621368000@www.neilsquire.ca
SUMMARY:NY Chapter: Proximity Switch Virtual Build
DESCRIPTION:With only a few 3D-printed parts\, a microcontroller\, and some open-source code you can change someone’s life. Join the Makers Making Change NY Chapter in partnership with Zero Day Camp and Blythedale Children’s hospital for this free\, virtual build event! Learn about the exciting world of D.I.Y. assistive technology through this hands-on Proximity Switch build event. \n\nAbout the Build and Lending Library \nWe are developing a lending library of DIY Assistive Technology and need your help to create our starting inventory. This build will create our inventory of proximity switches in order to loan out to AT users here in NYC. If you are building this switch\, we ask that you mail back the completed switch using the provided mailing label so we may add the device to our inventory. \nAbout the Proximity Switch: \nThis is a relatively low-cost accessibility switch activated by waving over or very lightly pressing the activation area. The switch is well-suited for use by small movements of a finger or larger gross movements of a hand or limb. This switch will help a person with a disability with daily living\, mobility\, computer access\, recreation\, and leisure. Here’s more info: Makers Making Change Light Proximity Switch Page (opens in a new window) \nRequirements: \n\nBasic soldering experience\nEnthusiasm to learn about DIY Assistive Tech!\n\nWhen registering\, please indicate if you require: just the components (you are able to print your own 3D prints and have the components)\, 3D parts and components (you do not have access to a printer)\, or neither if you have both components and printer or just want to watch.
URL:https://www.neilsquire.ca/event/ny-chapter-proximity-switch-virtual-build/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/04/Proximity.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Moncton:20210601T143000
DTEND;TZID=America/Moncton:20210601T160000
DTSTAMP:20210526T001325Z
CREATED:20210526T001325Z
LAST-MODIFIED:20210526T001325Z
UID:23824-1622557800-1622563200@www.neilsquire.ca
SUMMARY:Nelson Rural School Switch Build
DESCRIPTION:Makers Making Change is excited to be in the classroom! \nStudents from Nelson Rural School in Miramichi\, New Brunswick will be making Adaptive switches as part of learning about technology and assistive technology during New Brunswick’s Disability Awareness Week (opens in a new window). Students are being provided with tools\, materials and instruction from MMC staff and will build over 15 switches during this afternoon event! Many thanks to our partners at the New Brunswick Premier’s Council on Disabilities\, and New Brunswick’s Department of Education and Early Childhood Development which allow us to hold amazing events like this. \nBig thank you as well to teacher Rebecca Hitchman and everyone at Nelson Rural School for taking on and organizing this event with us. Switches made during this week will be provided to Stan Cassidy Centre for Rehabilitation\, and throughout New Brunswick and Atlantic Canada. \nAnd if you want to be involved in a build\, please get in touch with us at info@makersmakingchange.com (opens in a new window)!
URL:https://www.neilsquire.ca/event/nelson-rural-school-switch-build/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/05/Build3.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Edmonton:20210615T190000
DTEND;TZID=America/Edmonton:20210615T203000
DTSTAMP:20210611T202818Z
CREATED:20210611T202818Z
LAST-MODIFIED:20210611T202818Z
UID:23903-1623783600-1623789000@www.neilsquire.ca
SUMMARY:Virtual Build Event Edmonton – Dice Spinner
DESCRIPTION:Makers Making Change (new window) is hosting a virtual build event for some local Edmonton makers that are interested in volunteering their skills to build Dice Spinners (new window). The event takes place on on June 15 @ 7.00pm (MST). \n(This is a private event and by invitation only.) \nFull build kits\, tools\, parts and step-by-step instructions will be supplied to participants. \nTo build the switch requires good motor skills and vision. \nYou will need to: \n\nbe comfortable with simple soldering (no experience necessary)\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/virtual-build-event-edmonton-dice-spinner/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/gif:https://www.neilsquire.ca/wp-content/uploads/2021/06/dice-spinner-300x225-1.gif
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Moncton:20210721T180000
DTEND;TZID=America/Moncton:20210721T193000
DTSTAMP:20210716T223038Z
CREATED:20210716T223038Z
LAST-MODIFIED:20210716T223038Z
UID:23992-1626890400-1626895800@www.neilsquire.ca
SUMMARY:Fredericton Device Build
DESCRIPTION:Makers Making Change is hosting a fun event where individuals can volunteer their time to build an assistive device! \nParticipants will be provided with tools\, parts and instructions and shown how to build an assistive device – the dice spinner! The dice spinner allows an individual to roll a dice in a creative way\, by plugging in an adaptive switch and pressing to have the spinner roll the dice! This allows for anyone to roll a dice with a press of a switch! For more info on the dice spinner: https://www.makersmakingchange.com/project/dice-spinner/  \nMakers Making Change is a project that connects people who could benefit from assistive devices with volunteer makers. Makers Making Change is an innovative community-based initiative that connects makers to people with disabilities to create affordable open source assistive technologies. Makers Making Change utilizes emerging technology such as Arduino microcontrollers\, 3D printing and laser cutting. The project integrates the culture and communities that surround the open source movement\, the maker movement and the crowdsourcing movement.
URL:https://www.neilsquire.ca/event/fredericton-device-build/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/07/Fredericton-Device-Build.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20210831T133000
DTEND;TZID=America/Toronto:20210831T153000
DTSTAMP:20210806T195014Z
CREATED:20210806T195014Z
LAST-MODIFIED:20210806T195014Z
UID:24036-1630416600-1630423800@www.neilsquire.ca
SUMMARY:Canada Life – Build Event
DESCRIPTION:CANADA LIFE EMPLOYEES – LEARN NEW SKILLS! \nAs part of their contribution to community\, Canada Life employees are using their corporately supported community volunteer time to help build Assistive Technology. \nThe Regional Sales Support Ops Team in Toronto will be building a variety of assistive devices including adaptive switches\, writing aids and utensil holders. \nParticipants will receive a invitation to register via Zoom from your local department event coordinator.
URL:https://www.neilsquire.ca/event/canada-life-build-event/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/08/Canada-Life-Thumbnail-scaled-1-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20211017T150000
DTEND;TZID=America/Toronto:20211017T170000
DTSTAMP:20211006T182130Z
CREATED:20210816T200744Z
LAST-MODIFIED:20211006T182130Z
UID:24048-1634482800-1634490000@www.neilsquire.ca
SUMMARY:Georgia Occupational Therapy Association Buildathon
DESCRIPTION:In collaboration with the Georgia Occupational Therapy Association (GOTA) the Atlanta Chapter of Makers Making Change (MMC) is hosting a buildathon. A limited number of attendees of the Annual GOTA Conference will be able to participate in this build-a-thon in person. Virtual engagement will be open to all registered Annual GOTA Conference attendees via Zoom. \nParticipation is limited to 20 on-site participants. All on-site participants must adhere to the policies and procedures of the hosting makerspace: Freeside Atlanta. \nAgenda: \n\n3:00-3:15 Welcome and Introduction to Makers Making Change\n3:15-3:30 Safety and maker techniques\n3:30-4:30 Break into teams & device building\n4:30-5:00 Closing remarks
URL:https://www.neilsquire.ca/event/georgia-occupational-therapy-association-build-a-thon/
LOCATION:Freeside Atlanta\, 3043 Commerce Way\, Atlanta\, Georgia\, 30354
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/08/2021.10.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20211105T150000
DTEND;TZID=America/Toronto:20211105T180000
DTSTAMP:20211105T211956Z
CREATED:20211105T211927Z
LAST-MODIFIED:20211105T211956Z
UID:24320-1636124400-1636135200@www.neilsquire.ca
SUMMARY:McGill University Device Build
DESCRIPTION:We are so excited to have McGill University joining us in building devices! As part of their Design of Assistive Technology course\, students will be building our Round Flexure Switch and an updated design of our Dice Spinner device (stay tuned for this addition to our library!) Students will be introduced to our Makers Making Change (new window) Program\, receive insight on our device design process and how we update designs once receiving feedback from users. They will then be lead through instructions on building some devices! \nSpecial Thanks to Dr. Stefanie Blain-Moraes for her continued interest in our project. \nIf you are interested in a build like this for your classroom or work\, or in getting involved with Makers Making Change\, please reach out to info@makersmakingchange.com
URL:https://www.neilsquire.ca/event/mcgill-university-device-build/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/11/MicrosoftTeams-image-13.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20211203T083000
DTEND;TZID=America/Vancouver:20211203T113000
DTSTAMP:20211119T182742Z
CREATED:20211119T182742Z
LAST-MODIFIED:20211119T182742Z
UID:24366-1638520200-1638531000@www.neilsquire.ca
SUMMARY:Device Build with Ecole Mgr-Martin
DESCRIPTION:In celebration of UN International day of Persons with Disabilities\, 34 grade 6 students from École Mgr-Martin will build assistive switches and devices with Neil Squire’s Makers Making Change program. Students will be lead in instruction from our Makers Making Change staff and learn all about assistive technology! \n  \nLe 3 décembre\, pour souligner la Journée internationale des personnes handicapées de l’ONU\, 34 élèves en 6e année de l’École Mgr-Martin construiront des commutateurs et des dispositifs d’assistance avec le programme Makers Making Change de Neil Squire
URL:https://www.neilsquire.ca/event/device-build-with-ecole-mgr-martin/
LOCATION:Alberta
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/11/Ecole-Mgr-Martin.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Edmonton:20211203T140000
DTEND;TZID=America/Edmonton:20211203T160000
DTSTAMP:20211119T181925Z
CREATED:20211119T181925Z
LAST-MODIFIED:20211119T181925Z
UID:24363-1638540000-1638547200@www.neilsquire.ca
SUMMARY:Music Box Build Event
DESCRIPTION:Prospect staff will be introduced to our Makers Making Change (new window) Program\,  receive insight on our devices\, design process and how we update designs once receiving feedback from users. Then they will then be lead through instructions on building Memory Loss  Music Boxes with the creator of the device Ross Porter. If you are interested in a build like this for your classroom or work\, or in getting involved with Makers Making Change\, please reach out to info@makersmakingchange.com. This is a closed event for Prospect staff.
URL:https://www.neilsquire.ca/event/music-box-build-event/
LOCATION:Alberta
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/11/MicrosoftTeams-image-10.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20220224T110000
DTEND;TZID=America/Vancouver:20220224T130000
DTSTAMP:20220224T223122Z
CREATED:20220224T223122Z
LAST-MODIFIED:20220224T223122Z
UID:24623-1645700400-1645707600@www.neilsquire.ca
SUMMARY:MMC Team Build with Stan Cassidy Centre for Rehabilitation
DESCRIPTION:The MMC team is thrilled to be partnering with our friends at Stan Cassidy Centre for Rehabilitation to build their newly developed Lift switches and Twitch switches. \nThe Lift Switch\nThe Lift Switch is for people who have movement ability\, but who no longer have the strength or endurance to hover their hand or foot or other body part over an accessible switch they already own. The Lift Switch has three modes that all allow for use of your accessible switch in reverse\, where lifting off of the switch activates it. The Lift Switch project is currently in the research phase. \nThe Twitch Switch\nThe Twitch Switch is designed for people who have very limited motion. It consists of a controller box with three wireless sensors. Up to three sensors can then be attached to any part of the body where any movement is possible. That movement will be picked up by the sensors\, allowing the user to navigate a computer or wireless device screen\, or operate switch adapted devices. The Twitch Switch project is currently in the research and quality improvement phase. For more information on these switches and their research\, please visit: https://makersmakingchange.com/accessible-switch-research-study/.
URL:https://www.neilsquire.ca/event/mmc-team-build-with-stan-cassidy-centre-for-rehabilitation/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/02/MicrosoftTeams-image-14-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Edmonton:20220303T140000
DTEND;TZID=America/Edmonton:20220303T160000
DTSTAMP:20220224T224051Z
CREATED:20220224T224023Z
LAST-MODIFIED:20220224T224051Z
UID:24625-1646316000-1646323200@www.neilsquire.ca
SUMMARY:Prospect Edmonton Interact Switch Build
DESCRIPTION:Makers Making Change is hosting a workshop in partnership with Prospect Edmonton on March 3rd 2022  @ 2.00-4.00pm (MST) (this is a private event and by invitation only for Prospect employees) Full build kits\, tools and step by step instructions will be supplied to participants. To build the switch requires good motor skills and vision.   You will need to: \n\nbe comfortable with simple soldering (no experience necessary)\nhold and tighten a bolt\nhold and use a screwdriver\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/prospect-edmonton-interact-switch-build/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/02/MicrosoftTeams-image-18.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20220311
DTEND;VALUE=DATE:20220312
DTSTAMP:20220224T234936Z
CREATED:20220224T233829Z
LAST-MODIFIED:20220224T234936Z
UID:24627-1646956800-1647043199@www.neilsquire.ca
SUMMARY:Neil Squire Fredericton Toy Adapting Build
DESCRIPTION:Neil Squire Staff from our Fredericton New Brunswick office will be adapting toys to donate to IWK Grace Children’s Hospital! Staff will gather virtually and follow instructions facilitated by MMC staff to adapt the Smooth Moves Sloth toy & Cool Beats Penguin toy to be controlled with an accessible switch. The Smooth Moves Sloth and Cool Beats Penguin are Fisher Price toys that teach ABCs\, 123s\, opposites and simple games. Once adapted\, the toys will then be donated to the IWK Health Assistive Technology Services.
URL:https://www.neilsquire.ca/event/neil-squire-fredericton-toy-adapting-build/
LOCATION:Alberta
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/02/MicrosoftTeams-image-18-2-2048x711-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20220318
DTEND;VALUE=DATE:20220319
DTSTAMP:20220224T234809Z
CREATED:20220224T234809Z
LAST-MODIFIED:20220224T234809Z
UID:24631-1647561600-1647647999@www.neilsquire.ca
SUMMARY:Neil Squire Moncton Toy Adapting Build
DESCRIPTION:Neil Squire Staff from our Moncton New Brunswick office will be adapting toys to donate to IWK Grace Children’s Hospital! Staff will gather virtually and follow instructions facilitated by MMC staff to adapt the Star Master Projector toy to be controlled with an accessible switch. The star master projector switch adapted toy is a toy that lights up and spins. It projects the night sky onto the ceiling and walls\, and spins slowly to imitate the stars. It has a white light setting and a coloured light setting. Once adapted\, the toys will then be donated to the IWK Health Assistive Technology Services.
URL:https://www.neilsquire.ca/event/neil-squire-moncton-toy-adapting-build/
LOCATION:Alberta
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/02/MicrosoftTeams-image-17-2-2048x711-1.jpg
END:VEVENT
END:VCALENDAR