BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Neil Squire Society - ECPv6.17.3.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Neil Squire Society
X-ORIGINAL-URL:https://www.neilsquire.ca
X-WR-CALDESC:Events for Neil Squire Society
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Winnipeg
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20190310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20191103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20200308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20201101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20210314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20211107T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20220313T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20221106T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20230312T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20231105T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Vancouver
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20190310T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20191103T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20200308T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20201101T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20210314T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20211107T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20220313T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20221106T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20230312T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20231105T090000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Moncton
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20190310T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20191103T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20200308T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20201101T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20210314T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20211107T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20220313T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20221106T050000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Edmonton
BEGIN:DAYLIGHT
TZOFFSETFROM:-0700
TZOFFSETTO:-0600
TZNAME:MDT
DTSTART:20200308T090000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0700
TZNAME:MST
DTSTART:20201101T080000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0700
TZOFFSETTO:-0600
TZNAME:MDT
DTSTART:20210314T090000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0700
TZNAME:MST
DTSTART:20211107T080000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0700
TZOFFSETTO:-0600
TZNAME:MDT
DTSTART:20220313T090000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0700
TZNAME:MST
DTSTART:20221106T080000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0700
TZOFFSETTO:-0600
TZNAME:MDT
DTSTART:20230312T090000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0700
TZNAME:MST
DTSTART:20231105T080000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20200308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20201101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20210314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20211107T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20220313T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20221106T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Toronto
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20200308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20201101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20210314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20211107T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20220313T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20221106T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Halifax
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20210314T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20211107T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20220313T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20221106T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20230312T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20231105T050000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Winnipeg:20201105T120000
DTEND;TZID=America/Winnipeg:20201105T140000
DTSTAMP:20201123T214735Z
CREATED:20201123T214735Z
LAST-MODIFIED:20201123T214735Z
UID:22953-1604577600-1604584800@www.neilsquire.ca
SUMMARY:RBC MMC60 Switch Build
DESCRIPTION:Makers Making Change are hosting a workshop in partnership with RBC Royal Bank @ 4.00-6.00pm (CST) (this is a private event and by invitation only for employees in MSNWO Regions) Full build kits\, tools and step by step instructions will be supplied to participants. More information will be provided by your local RBC Royal Bank regional event coordinator. To build the switch requires good motor skills and vision. You will need to: \n\nbe comfortable with simple soldering (no experience necessary)\nhold and tighten a bolt\nhold and use a screwdriver\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/rbc-mmc60-switch-build/
CATEGORIES:Buildathon
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20201119T160000
DTEND;TZID=America/Vancouver:20201119T200000
DTSTAMP:20201123T215350Z
CREATED:20201123T215350Z
LAST-MODIFIED:20201123T215350Z
UID:22956-1605801600-1605816000@www.neilsquire.ca
SUMMARY:Makers Making Change Internal LipSync Buildathon
DESCRIPTION:Our Makers Making Change Program and Chapter leaders are building a LipSync live. Follow along with the fun! Watch the live stream here. (new window)
URL:https://www.neilsquire.ca/event/makers-making-change-internal-lipsync-buildathon/
CATEGORIES:Buildathon
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Winnipeg:20201125T120000
DTEND;TZID=America/Winnipeg:20201125T140000
DTSTAMP:20201123T214059Z
CREATED:20201123T214059Z
LAST-MODIFIED:20201123T214059Z
UID:22951-1606305600-1606312800@www.neilsquire.ca
SUMMARY:RBC Light Touch Switch Build
DESCRIPTION:Makers Making Change is hosting a workshop in partnership with RBC Royal Bank on November 25th 2020  @ 12noon-2.00pm (CST) (this is a private event and by invitation only for employees in MSNWO Regions) Full build kits\, tools and step by step instructions will be supplied to participants. More information will be provided by your local RBC Royal Bank regional event coordinator. To build the switch requires good motor skills and vision. You will need to: \n\nbe comfortable with simple soldering (no experience necessary)\ncomfortable using a glue gun (no experience necessary)\nhold and tighten a bolt\nhold and use a screwdriver\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/rbc-light-touch-switch-build/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2019/05/Light-touch-switch.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Moncton:20201203T140000
DTEND;TZID=America/Moncton:20201203T153000
DTSTAMP:20201120T234921Z
CREATED:20201120T234735Z
LAST-MODIFIED:20201120T234921Z
UID:22936-1607004000-1607009400@www.neilsquire.ca
SUMMARY:International Day For Persons With Disabilities Virtual Switch Build
DESCRIPTION:Neil Squire and Makers Making Change are excited to partner with New Brunswick’s Premier’s Council on Disabilities for a virtual event where participants will build adaptive switches in celebration of International Day for Persons with Disabilities! The International Day of Persons with Disabilities (IDPD) is annually observed on 3 December to promote the full and equal participation of persons with disabilities and to take action for the inclusion of persons with disabilities in all aspects of society and development. \nParticipants will be provided with tools and materials\, and be instructed by MMC staff on how to build a Round Flexure Switch (additional information on this switch can be found in our projects library) virtually. Participants learn how to solder and assemble the assistive device which will then be donated to Stan Cassidy Centre for Rehabilitation and their Technology Access program. Makers Making Change would like to thank Open Sky Cooperative in Sackville New Brunswick for participating in this event. \nRegistration for participating in this build event is currently closed\, but if you or your organization is interested in participating in a build\, please get in touch at info@makersmakingchange.com (new window)!
URL:https://www.neilsquire.ca/event/international-day-for-persons-with-disabilities-virtual-switch-build/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2020/11/Poster-Title-only-EN-2-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20210315T080000
DTEND;TZID=America/Vancouver:20210319T170000
DTSTAMP:20210313T001004Z
CREATED:20210313T001004Z
LAST-MODIFIED:20210313T001004Z
UID:23617-1615795200-1616173200@www.neilsquire.ca
SUMMARY:Bliss Carman Middle School Switch Builds
DESCRIPTION:Makers Making Change is excited to be in the classroom! Bliss Carman Middle School’s Grade 6 science classes will be making Light Touch and Raindrop switches during their class as part of learning about technology. Students are being provided with tools\, materials and instruction from MMC staff and throughout the week will build over 100 switches! Many thanks to our partners at the New Brunswick Premiere’s Council on Disabilities and National AccessAbillty Week which allow us to hold amazing events like this. \nBig thank you as well to Bliss Carman Middle School in Fredericton New Brunswick and teacher Mr. Chris Jones for taking on this project and partnering with us. Switches made during this week will be provided to Stan Cassidy Centre for Rehabilitation\, and throughout New Brunswick and Atlantic Canada.
URL:https://www.neilsquire.ca/event/bliss-carman-middle-school-switch-builds/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/03/Bliss-Carman-Switch-Build-1-1536x532-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Winnipeg:20210326T150000
DTEND;TZID=America/Winnipeg:20210326T170000
DTSTAMP:20210313T001415Z
CREATED:20210313T001415Z
LAST-MODIFIED:20210313T001415Z
UID:23619-1616770800-1616778000@www.neilsquire.ca
SUMMARY:Neovation Switch Build
DESCRIPTION:Makers Making Change are hosting a workshop in partnership with Neovation @ 3.00-5.00pm CST. (this is a private event and by invitation only for employees of Neovation.) Full build kits\, tools and step by step instructions will be supplied to participants. More information will be provided by your Neovation event coordinator. To build the switch requires good motor skills and vision. You will need to: \n\nbe comfortable with simple soldering (no experience necessary)\nhold and tighten a bolt\nhold and use a screwdriver\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/neovation-switch-build/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/03/Neovation-Switch-Build-Banner-1536x532-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Edmonton:20210428T130000
DTEND;TZID=America/Edmonton:20210428T140000
DTSTAMP:20210421T184219Z
CREATED:20210421T184219Z
LAST-MODIFIED:20210421T184219Z
UID:23713-1619614800-1619618400@www.neilsquire.ca
SUMMARY:PlayFull Potential Round Flexure Switch Build
DESCRIPTION:Makers Making Change is hosting a workshop in partnership with PlayFull Potential Calgary on April 28\, 2021  @ 1.00-2.00pm (MST) (this is a private event and by invitation only for PlayFull Potential employees) Full build kits\, tools and step by step instructions will be supplied to participants. To build the switch requires good motor skills and vision. You will need to: \n\nbe comfortable with simple soldering (no experience necessary)\nhold and tighten a bolt\nhold and use a screwdriver\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/playfull-potential-round-flexure-switch-build/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/04/PlayFull-Potential-Build-Banner-e1618936904980.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20210518T190000
DTEND;TZID=America/New_York:20210518T200000
DTSTAMP:20210421T184627Z
CREATED:20210421T184627Z
LAST-MODIFIED:20210421T184627Z
UID:23715-1621364400-1621368000@www.neilsquire.ca
SUMMARY:NY Chapter: Proximity Switch Virtual Build
DESCRIPTION:With only a few 3D-printed parts\, a microcontroller\, and some open-source code you can change someone’s life. Join the Makers Making Change NY Chapter in partnership with Zero Day Camp and Blythedale Children’s hospital for this free\, virtual build event! Learn about the exciting world of D.I.Y. assistive technology through this hands-on Proximity Switch build event. \n\nAbout the Build and Lending Library \nWe are developing a lending library of DIY Assistive Technology and need your help to create our starting inventory. This build will create our inventory of proximity switches in order to loan out to AT users here in NYC. If you are building this switch\, we ask that you mail back the completed switch using the provided mailing label so we may add the device to our inventory. \nAbout the Proximity Switch: \nThis is a relatively low-cost accessibility switch activated by waving over or very lightly pressing the activation area. The switch is well-suited for use by small movements of a finger or larger gross movements of a hand or limb. This switch will help a person with a disability with daily living\, mobility\, computer access\, recreation\, and leisure. Here’s more info: Makers Making Change Light Proximity Switch Page (opens in a new window) \nRequirements: \n\nBasic soldering experience\nEnthusiasm to learn about DIY Assistive Tech!\n\nWhen registering\, please indicate if you require: just the components (you are able to print your own 3D prints and have the components)\, 3D parts and components (you do not have access to a printer)\, or neither if you have both components and printer or just want to watch.
URL:https://www.neilsquire.ca/event/ny-chapter-proximity-switch-virtual-build/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/04/Proximity.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Moncton:20210601T143000
DTEND;TZID=America/Moncton:20210601T160000
DTSTAMP:20210526T001325Z
CREATED:20210526T001325Z
LAST-MODIFIED:20210526T001325Z
UID:23824-1622557800-1622563200@www.neilsquire.ca
SUMMARY:Nelson Rural School Switch Build
DESCRIPTION:Makers Making Change is excited to be in the classroom! \nStudents from Nelson Rural School in Miramichi\, New Brunswick will be making Adaptive switches as part of learning about technology and assistive technology during New Brunswick’s Disability Awareness Week (opens in a new window). Students are being provided with tools\, materials and instruction from MMC staff and will build over 15 switches during this afternoon event! Many thanks to our partners at the New Brunswick Premier’s Council on Disabilities\, and New Brunswick’s Department of Education and Early Childhood Development which allow us to hold amazing events like this. \nBig thank you as well to teacher Rebecca Hitchman and everyone at Nelson Rural School for taking on and organizing this event with us. Switches made during this week will be provided to Stan Cassidy Centre for Rehabilitation\, and throughout New Brunswick and Atlantic Canada. \nAnd if you want to be involved in a build\, please get in touch with us at info@makersmakingchange.com (opens in a new window)!
URL:https://www.neilsquire.ca/event/nelson-rural-school-switch-build/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/05/Build3.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Edmonton:20210615T190000
DTEND;TZID=America/Edmonton:20210615T203000
DTSTAMP:20210611T202818Z
CREATED:20210611T202818Z
LAST-MODIFIED:20210611T202818Z
UID:23903-1623783600-1623789000@www.neilsquire.ca
SUMMARY:Virtual Build Event Edmonton – Dice Spinner
DESCRIPTION:Makers Making Change (new window) is hosting a virtual build event for some local Edmonton makers that are interested in volunteering their skills to build Dice Spinners (new window). The event takes place on on June 15 @ 7.00pm (MST). \n(This is a private event and by invitation only.) \nFull build kits\, tools\, parts and step-by-step instructions will be supplied to participants. \nTo build the switch requires good motor skills and vision. \nYou will need to: \n\nbe comfortable with simple soldering (no experience necessary)\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/virtual-build-event-edmonton-dice-spinner/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/gif:https://www.neilsquire.ca/wp-content/uploads/2021/06/dice-spinner-300x225-1.gif
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Moncton:20210721T180000
DTEND;TZID=America/Moncton:20210721T193000
DTSTAMP:20210716T223038Z
CREATED:20210716T223038Z
LAST-MODIFIED:20210716T223038Z
UID:23992-1626890400-1626895800@www.neilsquire.ca
SUMMARY:Fredericton Device Build
DESCRIPTION:Makers Making Change is hosting a fun event where individuals can volunteer their time to build an assistive device! \nParticipants will be provided with tools\, parts and instructions and shown how to build an assistive device – the dice spinner! The dice spinner allows an individual to roll a dice in a creative way\, by plugging in an adaptive switch and pressing to have the spinner roll the dice! This allows for anyone to roll a dice with a press of a switch! For more info on the dice spinner: https://www.makersmakingchange.com/project/dice-spinner/  \nMakers Making Change is a project that connects people who could benefit from assistive devices with volunteer makers. Makers Making Change is an innovative community-based initiative that connects makers to people with disabilities to create affordable open source assistive technologies. Makers Making Change utilizes emerging technology such as Arduino microcontrollers\, 3D printing and laser cutting. The project integrates the culture and communities that surround the open source movement\, the maker movement and the crowdsourcing movement.
URL:https://www.neilsquire.ca/event/fredericton-device-build/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/07/Fredericton-Device-Build.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20210831T133000
DTEND;TZID=America/Toronto:20210831T153000
DTSTAMP:20210806T195014Z
CREATED:20210806T195014Z
LAST-MODIFIED:20210806T195014Z
UID:24036-1630416600-1630423800@www.neilsquire.ca
SUMMARY:Canada Life – Build Event
DESCRIPTION:CANADA LIFE EMPLOYEES – LEARN NEW SKILLS! \nAs part of their contribution to community\, Canada Life employees are using their corporately supported community volunteer time to help build Assistive Technology. \nThe Regional Sales Support Ops Team in Toronto will be building a variety of assistive devices including adaptive switches\, writing aids and utensil holders. \nParticipants will receive a invitation to register via Zoom from your local department event coordinator.
URL:https://www.neilsquire.ca/event/canada-life-build-event/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/08/Canada-Life-Thumbnail-scaled-1-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20211017T150000
DTEND;TZID=America/Toronto:20211017T170000
DTSTAMP:20211006T182130Z
CREATED:20210816T200744Z
LAST-MODIFIED:20211006T182130Z
UID:24048-1634482800-1634490000@www.neilsquire.ca
SUMMARY:Georgia Occupational Therapy Association Buildathon
DESCRIPTION:In collaboration with the Georgia Occupational Therapy Association (GOTA) the Atlanta Chapter of Makers Making Change (MMC) is hosting a buildathon. A limited number of attendees of the Annual GOTA Conference will be able to participate in this build-a-thon in person. Virtual engagement will be open to all registered Annual GOTA Conference attendees via Zoom. \nParticipation is limited to 20 on-site participants. All on-site participants must adhere to the policies and procedures of the hosting makerspace: Freeside Atlanta. \nAgenda: \n\n3:00-3:15 Welcome and Introduction to Makers Making Change\n3:15-3:30 Safety and maker techniques\n3:30-4:30 Break into teams & device building\n4:30-5:00 Closing remarks
URL:https://www.neilsquire.ca/event/georgia-occupational-therapy-association-build-a-thon/
LOCATION:Freeside Atlanta\, 3043 Commerce Way\, Atlanta\, Georgia\, 30354
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/08/2021.10.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20211105T150000
DTEND;TZID=America/Toronto:20211105T180000
DTSTAMP:20211105T211956Z
CREATED:20211105T211927Z
LAST-MODIFIED:20211105T211956Z
UID:24320-1636124400-1636135200@www.neilsquire.ca
SUMMARY:McGill University Device Build
DESCRIPTION:We are so excited to have McGill University joining us in building devices! As part of their Design of Assistive Technology course\, students will be building our Round Flexure Switch and an updated design of our Dice Spinner device (stay tuned for this addition to our library!) Students will be introduced to our Makers Making Change (new window) Program\, receive insight on our device design process and how we update designs once receiving feedback from users. They will then be lead through instructions on building some devices! \nSpecial Thanks to Dr. Stefanie Blain-Moraes for her continued interest in our project. \nIf you are interested in a build like this for your classroom or work\, or in getting involved with Makers Making Change\, please reach out to info@makersmakingchange.com
URL:https://www.neilsquire.ca/event/mcgill-university-device-build/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/11/MicrosoftTeams-image-13.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20211203T083000
DTEND;TZID=America/Vancouver:20211203T113000
DTSTAMP:20211119T182742Z
CREATED:20211119T182742Z
LAST-MODIFIED:20211119T182742Z
UID:24366-1638520200-1638531000@www.neilsquire.ca
SUMMARY:Device Build with Ecole Mgr-Martin
DESCRIPTION:In celebration of UN International day of Persons with Disabilities\, 34 grade 6 students from École Mgr-Martin will build assistive switches and devices with Neil Squire’s Makers Making Change program. Students will be lead in instruction from our Makers Making Change staff and learn all about assistive technology! \n  \nLe 3 décembre\, pour souligner la Journée internationale des personnes handicapées de l’ONU\, 34 élèves en 6e année de l’École Mgr-Martin construiront des commutateurs et des dispositifs d’assistance avec le programme Makers Making Change de Neil Squire
URL:https://www.neilsquire.ca/event/device-build-with-ecole-mgr-martin/
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/11/Ecole-Mgr-Martin.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Edmonton:20211203T140000
DTEND;TZID=America/Edmonton:20211203T160000
DTSTAMP:20211119T181925Z
CREATED:20211119T181925Z
LAST-MODIFIED:20211119T181925Z
UID:24363-1638540000-1638547200@www.neilsquire.ca
SUMMARY:Music Box Build Event
DESCRIPTION:Prospect staff will be introduced to our Makers Making Change (new window) Program\,  receive insight on our devices\, design process and how we update designs once receiving feedback from users. Then they will then be lead through instructions on building Memory Loss  Music Boxes with the creator of the device Ross Porter. If you are interested in a build like this for your classroom or work\, or in getting involved with Makers Making Change\, please reach out to info@makersmakingchange.com. This is a closed event for Prospect staff.
URL:https://www.neilsquire.ca/event/music-box-build-event/
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2021/11/MicrosoftTeams-image-10.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20220224T110000
DTEND;TZID=America/Vancouver:20220224T130000
DTSTAMP:20220224T223122Z
CREATED:20220224T223122Z
LAST-MODIFIED:20220224T223122Z
UID:24623-1645700400-1645707600@www.neilsquire.ca
SUMMARY:MMC Team Build with Stan Cassidy Centre for Rehabilitation
DESCRIPTION:The MMC team is thrilled to be partnering with our friends at Stan Cassidy Centre for Rehabilitation to build their newly developed Lift switches and Twitch switches. \nThe Lift Switch\nThe Lift Switch is for people who have movement ability\, but who no longer have the strength or endurance to hover their hand or foot or other body part over an accessible switch they already own. The Lift Switch has three modes that all allow for use of your accessible switch in reverse\, where lifting off of the switch activates it. The Lift Switch project is currently in the research phase. \nThe Twitch Switch\nThe Twitch Switch is designed for people who have very limited motion. It consists of a controller box with three wireless sensors. Up to three sensors can then be attached to any part of the body where any movement is possible. That movement will be picked up by the sensors\, allowing the user to navigate a computer or wireless device screen\, or operate switch adapted devices. The Twitch Switch project is currently in the research and quality improvement phase. For more information on these switches and their research\, please visit: https://makersmakingchange.com/accessible-switch-research-study/.
URL:https://www.neilsquire.ca/event/mmc-team-build-with-stan-cassidy-centre-for-rehabilitation/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/02/MicrosoftTeams-image-14-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Edmonton:20220303T140000
DTEND;TZID=America/Edmonton:20220303T160000
DTSTAMP:20220224T224051Z
CREATED:20220224T224023Z
LAST-MODIFIED:20220224T224051Z
UID:24625-1646316000-1646323200@www.neilsquire.ca
SUMMARY:Prospect Edmonton Interact Switch Build
DESCRIPTION:Makers Making Change is hosting a workshop in partnership with Prospect Edmonton on March 3rd 2022  @ 2.00-4.00pm (MST) (this is a private event and by invitation only for Prospect employees) Full build kits\, tools and step by step instructions will be supplied to participants. To build the switch requires good motor skills and vision.   You will need to: \n\nbe comfortable with simple soldering (no experience necessary)\nhold and tighten a bolt\nhold and use a screwdriver\nsqueeze and use wire strippers\nuse a craft knife\n\nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/prospect-edmonton-interact-switch-build/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/02/MicrosoftTeams-image-18.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20220311
DTEND;VALUE=DATE:20220312
DTSTAMP:20220224T234936Z
CREATED:20220224T233829Z
LAST-MODIFIED:20220224T234936Z
UID:24627-1646956800-1647043199@www.neilsquire.ca
SUMMARY:Neil Squire Fredericton Toy Adapting Build
DESCRIPTION:Neil Squire Staff from our Fredericton New Brunswick office will be adapting toys to donate to IWK Grace Children’s Hospital! Staff will gather virtually and follow instructions facilitated by MMC staff to adapt the Smooth Moves Sloth toy & Cool Beats Penguin toy to be controlled with an accessible switch. The Smooth Moves Sloth and Cool Beats Penguin are Fisher Price toys that teach ABCs\, 123s\, opposites and simple games. Once adapted\, the toys will then be donated to the IWK Health Assistive Technology Services.
URL:https://www.neilsquire.ca/event/neil-squire-fredericton-toy-adapting-build/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/02/MicrosoftTeams-image-18-2-2048x711-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20220318
DTEND;VALUE=DATE:20220319
DTSTAMP:20220224T234809Z
CREATED:20220224T234809Z
LAST-MODIFIED:20220224T234809Z
UID:24631-1647561600-1647647999@www.neilsquire.ca
SUMMARY:Neil Squire Moncton Toy Adapting Build
DESCRIPTION:Neil Squire Staff from our Moncton New Brunswick office will be adapting toys to donate to IWK Grace Children’s Hospital! Staff will gather virtually and follow instructions facilitated by MMC staff to adapt the Star Master Projector toy to be controlled with an accessible switch. The star master projector switch adapted toy is a toy that lights up and spins. It projects the night sky onto the ceiling and walls\, and spins slowly to imitate the stars. It has a white light setting and a coloured light setting. Once adapted\, the toys will then be donated to the IWK Health Assistive Technology Services.
URL:https://www.neilsquire.ca/event/neil-squire-moncton-toy-adapting-build/
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/02/MicrosoftTeams-image-17-2-2048x711-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Halifax:20220322T143000
DTEND;TZID=America/Halifax:20220322T170000
DTSTAMP:20220322T163606Z
CREATED:20220322T163606Z
LAST-MODIFIED:20220322T163606Z
UID:24716-1647959400-1647968400@www.neilsquire.ca
SUMMARY:Lift Switch Build with Dr. J.H. Gillis High School
DESCRIPTION:Makers Making Change (new window) is excited to work with students from Dr. J.H. Gillis High School in Antigonish\, Nova Scotia to build lift switches. These switches are newly developed by Stan Cassidy Centre for Rehabilitation (SCCR). The switches work in reverse to a traditional switch\, with the individual being able to rest their hand or foot on the switch and lift their hand/foot when they wish to activate. This creates less fatigue for the user when using the switch and is a useful application for many users. \nIf you are interested in a lift switch\, or in working with us in a build – please reach out: info@makersmakingchange.ca
URL:https://www.neilsquire.ca/event/lift-switch-build-with-dr-j-h-gillis-high-school/
CATEGORIES:Buildathon,Community Event,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/03/MicrosoftTeams-image-20.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20220403T103000
DTEND;TZID=America/Toronto:20220403T150000
DTSTAMP:20220224T235340Z
CREATED:20220224T235340Z
LAST-MODIFIED:20220224T235340Z
UID:24633-1648981800-1648998000@www.neilsquire.ca
SUMMARY:Enabled Controller Build
DESCRIPTION:Join the NYC chapter of Makers Making Change and help us build the Enabled Controller Mini to add to our DIY AT lending library. This device functions as a switch interface for use between access switches and a computer or mobile device. They allow a person with a motor disability to use a customized button that plugs into the device in order to interact with their computer. \nMaterials\nAll the needed components\, 3D prints\, and soldering equipment will be provided. If you are able to 3D print your own case that would be most helpful but not necessary. STL files are available here. You will need to bring a laptop with Arduino software already installed. If possible\, additional installation of the MU code editor would be helpful. Both are free downloads. \nAudience\nWe welcome both experienced-> novice makers\, disability professionals\, and family members. We will be soldering so please no young children! \nLocation\nMakerspaceNYC is located at the Brooklyn Army Terminal 140 58th St Building B Unit 1C\, Brooklyn\, NY 11220  Free parking is available on site and is accessible. Have questions? Email us!
URL:https://www.neilsquire.ca/event/enabled-controller-build/
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/02/Enabled-Controller-Thumbnail.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20220413T140000
DTEND;TZID=America/Vancouver:20220413T153000
DTSTAMP:20220401T220032Z
CREATED:20220401T215846Z
LAST-MODIFIED:20220401T220032Z
UID:24767-1649858400-1649863800@www.neilsquire.ca
SUMMARY:Microbit Bluetooth Switch Build for iOS Control
DESCRIPTION:Assistive technology (AT) is any device or system that improves the quality and independence of a person with a disability. Unfortunately\, oftentimes the cost of these devices is prohibitive and the procurement process can be quite lengthy and frustrating. DIY (Do It Yourself) or DFO (Do For Others) AT has been a growing movement allowing more affordable access to these types of devices using common fabrication techniques and commercially available components. This global pandemic has brought to light the importance of access to the internet and other computer/ mobile device resources. \nThis workshop will be broken into two parts: \n\n30 minutes: An overview of the concepts\, including an example low-cost DIY AT device (<$25) and a demonstration of how it’s used to operate an iPad.\n1 hour (Optional): A walk-through of the building and setting up the example device. Details on parts and tools are provided below and we encourage participants to “build along” with us.  We’ll even provide part of the materials (for the cost of shipping & while supplies last)!\n\nTarget Audience:\nThis build is geared specifically for novice makers or individuals interested in providing an access method for a user with a physical disability. Target participants include family members\, caregivers\, disability professionals\, or AT users themselves. This project DOES NOT require any soldering or access to 3D printing and utilizes commonly available and commercially accessible materials. In addition\, the code used is beginner-friendly and block-based using the Makecode (new window) platform. \nPresenters:\nBill Siever\nBill is a Teaching Professor at Washington University in St. Louis\, where he teaches courses in Computer Science and Engineering. In addition\, Bill tries to develop materials that make technology more approachable for everyone. \nLoreto Dumitrescu\nLoreto is an occupational therapist and educational technologist. She has been working in the field of assistive technology for over a decade and helps run the NYC chapter of Makers Making Change (new window).
URL:https://www.neilsquire.ca/event/microbit-bluetooth-switch-build-for-ios-control/
LOCATION:Virtual
CATEGORIES:Buildathon,Community Event,Makers Making Change,Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/04/Microbit-Event.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Winnipeg:20220512T130000
DTEND;TZID=America/Winnipeg:20220512T160000
DTSTAMP:20220505T161439Z
CREATED:20220505T161439Z
LAST-MODIFIED:20220505T161439Z
UID:24899-1652360400-1652371200@www.neilsquire.ca
SUMMARY:North Forge Switch Build Event
DESCRIPTION:Makers Making Change are hosting a workshop in partnership with North Forge\, supported by Women in 3D Printing\, on May 12 2022  @ 1.00pm-4.00pm (CST) \n(this is a private event and by invitation only ) \nJoin us to learn about Assistive Technology and the work of the Neil Squire Society and the Makers Making Change program.  Learn some of the basics of 3D printing using slicr software\, how to design a switch topper and build your own MMC60 Flexure switch. \nThis switch is activated by applying pressure on the top surface. This switch can be connected to any standard AT interface\, and can be used to operate switch adapted toys and with the Xbox Adaptive Controller. The switch can be used on a flat surface or mounted using the 1/4″-20 UNC connection on the bottom. \nThe top button / activation surface is attached to the base by threading it on. This makes it easy to change tops to change color\, labels\, etc. \nFull build kits\, tools and step by step instructions will be supplied to participating Students will be joined by North Forge mentors to help with the switch build. \nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community! 
URL:https://www.neilsquire.ca/event/north-forge-switch-build-event/
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/05/MicrosoftTeams-image-6-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20220520
DTEND;VALUE=DATE:20220524
DTSTAMP:20220516T143109Z
CREATED:20220516T143109Z
LAST-MODIFIED:20220516T143109Z
UID:24932-1653004800-1653350399@www.neilsquire.ca
SUMMARY:D-Camps Build Event
DESCRIPTION:Makers Making Change is hosting a workshop in partnership D-Camp’s Jean Nelson Family Camp (new window)\, on May 20-23 2022.  Full build kits\, tools and step by step instructions will be supplied to participating campers. This is a private event for attendees of the Jean Nelson Family Camp \nMakers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!
URL:https://www.neilsquire.ca/event/d-camps-build-event/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/png:https://www.neilsquire.ca/wp-content/uploads/2022/05/MicrosoftTeams-image-9.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Edmonton:20220520T120000
DTEND;TZID=America/Edmonton:20220520T140000
DTSTAMP:20220516T143729Z
CREATED:20220516T143701Z
LAST-MODIFIED:20220516T143729Z
UID:24934-1653048000-1653055200@www.neilsquire.ca
SUMMARY:Balgonie Elementary School Build
DESCRIPTION:Makers Making Change is hosting a  build event with students at Balgonie Elementary School\, on May 20 2022  @ 12:00pm-2.00pm (MST). Full build kits\, tools and step by step instructions will be supplied to participating students. (This is a private event and by invitation only). Makers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!  
URL:https://www.neilsquire.ca/event/balgonie-elementary-school-build/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/png:https://www.neilsquire.ca/wp-content/uploads/2022/05/Intereact-Event-Banner.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Halifax:20220526T090000
DTEND;TZID=America/Halifax:20220526T110000
DTSTAMP:20220516T184458Z
CREATED:20220516T184458Z
LAST-MODIFIED:20220516T184458Z
UID:24940-1653555600-1653562800@www.neilsquire.ca
SUMMARY:Switch Build with Sussex Regional High School
DESCRIPTION:Makers Making Change is excited to build assistive switches with students from Sussex Regional High School in Sussex\, New Brunswick! \nIn collaboration with New Brunswick’s Department of Education and Early Childhood Development and Disability Awareness Week\, 20 students will be lead in instruction from our Makers Making Change staff\, learn all about assistive technology\, and build assistive switches which will then be donated throughout New Brunswick and Atlantic Canada.
URL:https://www.neilsquire.ca/event/switch-build-with-sussex-regional-high-school/
CATEGORIES:Buildathon
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/05/Sussex_Banner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Edmonton:20220530T180000
DTEND;TZID=America/Edmonton:20220530T200000
DTSTAMP:20220516T185644Z
CREATED:20220516T185644Z
LAST-MODIFIED:20220516T185644Z
UID:24944-1653933600-1653940800@www.neilsquire.ca
SUMMARY:Big Brothers Big Sisters Light Touch Switch Build
DESCRIPTION:Makers Making Change is hosting a workshop in partnership with Big Brothers Big Sisters Calgary\, on May 30 2022 @ 6.00pm-8.00pm (MST). Full build kits\, tools and step by step instructions will be supplied to participating mentees and mentors. (This is a private event and by invitation only). Makers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!   \n\nMay 30 @ 6:00 pm – 8:00 pm MST
URL:https://www.neilsquire.ca/event/big-brothers-big-sisters-light-touch-switch-build/
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/png:https://www.neilsquire.ca/wp-content/uploads/2022/05/Light-Touch-big.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Halifax:20220531T090000
DTEND;TZID=America/Halifax:20220531T110000
DTSTAMP:20220516T202248Z
CREATED:20220516T202248Z
LAST-MODIFIED:20220516T202248Z
UID:24950-1653987600-1653994800@www.neilsquire.ca
SUMMARY:Toy Adapting with WES Program
DESCRIPTION:Makers Making Change is so excited to partner with New Brunswick’s WES (Workplace Essential Skills) Carpenters Training program on Kingsclear First Nation to adapt toys! \nThe amazing individuals in this program were approached to adapt toys as part of New Brunswick’s Disability Awareness Week\, and not only were they interested – they took it a step further by fundraising money to buy even more toys to donate to the IWK Children’s Hospital! To date\, they have raised almost $2000! \nWe are so excited by this project\, and stayed tuned to see how many toys they do!
URL:https://www.neilsquire.ca/event/toy-adapting-with-wes-program/
CATEGORIES:Buildathon,Community Event,Makers Making Change
ATTACH;FMTTYPE=image/jpeg:https://www.neilsquire.ca/wp-content/uploads/2022/05/WES_Banner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Edmonton:20220531T180000
DTEND;TZID=America/Edmonton:20220531T200000
DTSTAMP:20220516T203838Z
CREATED:20220516T203752Z
LAST-MODIFIED:20220516T203838Z
UID:24953-1654020000-1654027200@www.neilsquire.ca
SUMMARY:Big Brothers Big Sister MMC 60 Switch Build
DESCRIPTION:Makers Making Change is hosting a workshop in partnership with Big Brothers Big Sisters Calgary\, on May 31 2022 @ 6.00pm-8.00pm (MST). Full build kits\, tools and step by step instructions will be supplied to participating mentees and mentors. (This is a private event and by invitation only). Makers Making Change is pleased to have you join us to provide assistive devices to people with disabilities in your community!  
URL:https://www.neilsquire.ca/event/big-brothers-big-sister-mmc-60-switch-build/
CATEGORIES:Buildathon,Makers Making Change
ATTACH;FMTTYPE=image/png:https://www.neilsquire.ca/wp-content/uploads/2022/05/MMC-Round-Flexure.png
END:VEVENT
END:VCALENDAR